Verification for Pixel Implementation on a Webpage

1. Navigate to the URL that contains your pixel

2. Right-click any static area on the webpage and select Inspect Element

    3. Click on the Network tab

    4. In the search bar, type: connect

 

     5. The URL containing "connect.blockboardtech" should appear

Note: If you do not see a URL containing connect.blockboardtech, then there is no pixel implemented on the webpage

      6. Click on the name "t"

      7. Click on the smaller tab that says Headers

       8.  Refresh the webpage

       9. Status should now load and show 200 OK. This means the pixel is active and firing on the webpage

Note: If you see any number other than 200 then the pixel is not properly implemented